About Me

xiu umin

Venting And Cooling Design for Daily Necessities Mould

0 0


The exhaust system of the Daily Necessities Mould(FURNITUREMOULD) plays an important role in ensuring the quality of the product.

Using a venting trough, the venting trough is typically located at the end of the cavity where it is filled. The depth of the venting groove varies from plastic to plastic, essentially determined by the maximum allowable gap of the plastic, without burring, for example, ABS 0.04 below 0.02 mm gypsum and 0.02 steel.

Use the core insertion push rod or special vent plug to install the venting, sometimes to prevent the product from jetting caused by vacuum deformation, the gas needle must be set; sometimes, the vacuum absorbing assembly is designed to prevent vacuum adsorption of the product and module.

The design of the cooling system is a complex task, taking into account the cooling effect and cooling uniformity, as well as the impact of the cooling system on the overall structure of the daily necessities.


The arrangement of the cooling system and the specific form of the cooling system;

Determine the specific location and size of the cooling system;

Key components such as moving moulds or insert cooling;

Cooling side slider and side core;

Selection of cooling elements and selection of cooling standard components;

Sealed structure design.

Click Household Product Mould to learn about more information.


Similar Blogs


1 album found
  • Venting And Cooling Design for Daily Necessit... By xiu umin 0 0 0 29 1

    1 photo